LPMS 1000

Side Injection Separate Tank Machine

5 liter melt tank, which is separated from machine.
Low Pressure Molding process controlled by Programmable Logic Controller.
Human Machine Interface with multi-language (Chinese, English, French, German, Italian).
Three thermal control zones.
Mechanical ejection system and control for pneumatic ejection.
Two safety start buttons, light curtain to protect operator.

Application

Our Side Low pressure molding Machinemachines are engineered for low pressure molding applications. Using specialty resins to encapsulate delicate parts.

Applications including : automotive electronics, PCBA，coil, fiber-optic, LED lighting, wire, cable, etc.

Specification

Machine Size / Weight	970 mm x 970 mm x 1700 mm / 325 kg 38.19 in x 38.19 in x 66.93 in / 717 lbs
Footprint	970 mm x 1700 mm \| 38.19 in x 66.93 in
Working Station Height	840 mm \| 33.07 in
Packing Size / Weight	1010 mm x 990 mm x 1850 mm / 365 kg 39.76 in x 38.98 in x 72.83 in / 805 lbs
Melting Tank Model & Q'ty	MT-05-1000 x 1
Auto Feeding System	Optional
Maximum shot size	5.8 g / RPM
Injection rate	5 grams / second
Gun Model & Tip	LPMS-G10 x 1 / 36.4° or 90°
Heated Hose Model & Q'ty	LPMS-H12J x 1
Electricity	200-240VAC / 1 Phase / 50 or 60 Hz
Temperature Control Zones	3
Temperature Range	Ambient up to 250°C / 485°F
Max .Power	4.5 Kw
Pump Motor	120 W
Min. Air Pressure	0.5 MPa \| 73 Psi
Air Consumption	0.1m3 / min \| 3.5ft3 / min
Clamping	Air Cylinder
Clamping Force	Max. 1.2 Tons
Clamping Stroke	150mm \| 5.91 in
Ejector	Pneumatic
Ejector Force	980 N
Ejector Stroke	10 mm
Control System	7 ”HMI , PLC controlled
Safety Protection	Dual palm buttons , Light curtain
Mold Set Size	230 mm x 120 mm x 150 mm / 25 kg 9.06 in x 4.72 in x 5.91 in / 55 lbs
Max . Mold Set Size	300 mm x 200 mm x 150 mm 11.81 in x 7.87 in x 5.91 in
Max . Part Size	60 mm x 50 mm x 18 mm 2.36 in x 1.97 in x 0.71 in